Part Number Hot Search : 
2N3791 2812D A1101P TC11CP PR1002G NTE70 PN4250A CAP1014
Product Description
Full Text Search
 

To Download LPJ-12SPI Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Bussmann(R)
LOW-PEAK
(R)
LPJ_SPI
6-60 Amps
General Information: * Permanent fuse Indication. * True dual-element fuses with a minimum 10 second timedelay at 500% overload. * Long time-delay minimizes needless fuse openings due to temporary overloads and transient surges. * Can often be sized for back-up protection against motor burnout from overload or single-phasing if other overload protective devices fail. * High interrupting rating to safely interrupt overcurrents up to 300,000A. * High degree of current limitation due to the fast speed-ofresponse to short-circuits. * Faster response to damaging short-circuit currents than mechanical overcurrent protective devices. * Reduces let-through thermal and magnetic forces in order to protect low withstand rated components. * Proper sizing provides "no damage" Type "2" coordinated protection for NEMA and IEC motor control in accordance with IEC Standard 947-4-1. * Dual-element fuses have lower resistance than ordinary fuses so they run cooler. * Lower watts loss reduces power consumption. * Unique dimensions assure that another class of fuse with a lesser voltage rating, interrupting rating or current-Iimiting ability cannot be substituted. * Space-saving package for equipment down sizing.
Dual-Element Time-Delay Fuses Class J - 600 Volt
Dimensional Data
2.25" ( 0.03) .81" .5" ( 0.03) 1A to 30A 2.38" ( 0.03) .63"
35A to 60A
1.06" ( 0.03)
Catalog Symbol: LPJ_SPI Dual-Element, Time-Delay - 10 seconds (minimum) at 500% rated current Current-Limiting Ampere Rating: 6 to 60A Voltage Rating: 600Vac (or less) 300Vdc (or less): 35-60A Interrupting Rating: 300,000A RMS Sym. (UL) 100,000A dc Agency Information: UL Listed -- Special Purpose*, Guide JFHR, File E56412 CSA Certified, 200,000 AIR, Class J per CSA 22.2 No. 248.8 Class 1422-02, File 53787
*Meets all performance requirements of UL Standard 248-8 for Class J fuses.
Catalog Symbol and Ampere Ratings
LPJ-6SPI LPJ-7SPI LPJ-8SPI LPJ-9SPI LPJ-10SPI LPJ-12SPI LPJ-15SPI LPJ-17TMSPI LPJ-20SPI LPJ-25SPI LPJ-30SPI LPJ-35SPI LPJ-40SPI LPJ-45SPI LPJ-50SPI LPJ-60SPI
Recommended fuseblocks/fuseholders for Class J 600V fuses See Data Sheets listed below * Finger-safe fuseholders - 1152 * Open fuseblocks - 1114 * Open pyramid fuseblocks - 1108
Carton Quantity and Weight
Ampere Ratings 6-30 35-60 **Weight per carton. CE logo denotes compliance with European Union Low Voltage Directive (50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. Carton Qty. 10 10 Weight** Lbs. 1.09 1.78 Kg. 0.494 0.808
For non-indicating version, the LPJ_SP is available. See Data Sheet: 1006
8-26-04
SB04295
Form No. LPJ_SPI 6-60 Page 1 of 3 Data Sheet: 1062
Bussmann(R)
LOW-PEAK(R)
Dual-Element Time-Delay Fuses Class J - 600 Volt
Time-Current Characteristic Curves-Average Melt
LPJ_SPI
6-60 Amps
10A
300 200 100
10 TIME IN SECONDS
1
.1
100
CURRENT IN AMPERES
1,000
10
.01 1
15A
6A
30A
AMPERE RATING
60A
8-26-04
SB04295
Form No. LPJ_SPI 6-60 Page 2 of 3 Data Sheet: 1062
Bussmann(R)
LOW-PEAK(R)
Dual-Element Time-Delay Fuses Class J - 600 Volt
Current Limitation Curves
LPJ_SPI
6-60 Amps
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
8-26-04
SB04295
Form No. LPJ_SPI 6-60 Page 3 of 3 Data Sheet: 1062


▲Up To Search▲   

 
Price & Availability of LPJ-12SPI

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X